Using the Python package¶
After installing GROMACS, sourcing the “GMXRC” (see GROMACS docs), and installing
the gmxapi Python package (see Full installation instructions), import the package in a Python
script or interactive interpreter. This documentation assumes a convenient alias
of gmx
to refer to the gmxapi
Python package.
import gmxapi as gmx
For full documentation of the Python-level interface and API, use the pydoc
command line tool or the help()
interactive Python function, or refer to
the gmxapi Python module reference.
Any Python exception raised by gmxapi
should be descended from (and catchable as) gmxapi.exceptions.Error
.
Additional status messages can be acquired through the Logging
facility.
Unfortunately, some errors occurring in the GROMACS library are not yet
recoverable at the Python level, and much of the standard GROMACS terminal
output is not yet accessible through Python.
If you find a particularly problematic scenario, please file a GROMACS bug report.
During installation, the gmxapi Python package becomes tied to a specific GROMACS installation. If you would like to access multiple GROMACS installations from Python, build and install gmxapi in separate virtual environments.
Notes on parallelism and MPI¶
When launching a gmxapi script in an MPI environment,
such as with mpiexec or srun,
you must help gmxapi detect the MPI environment by ensuring that mpi4py
is loaded.
Refer to MPI requirements for more on installing mpi4py
.
Assuming you use mpiexec to launch MPI jobs in your environment, run a gmxapi script on two ranks with something like the following. Note that it can be helpful to provide mpiexec with the full path to the intended Python interpreter since new process environments are being created.
mpiexec -n 2 `which python` -m mpi4py myscript.py
gmxapi 0.1 has limited parallelism, but future versions will include seamless
acceleration as integration improves with the GROMACS library and computing
environment runtime resources.
Currently, gmxapi and the GROMACS library do not have an effective way to
share an MPI environment.
Therefore, if you intend to run more than one simulation at a time, in parallel,
in a gmxapi script, you should build GROMACS with thread-MPI instead of a
standard MPI library.
I.e. configure GROMACS with the CMake flag -DGMX_THREAD_MPI=ON
.
Then, launch your gmxapi script with one MPI rank per node, and gmxapi will
assign each (non-MPI) simulation to its own node, while keeping the full MPI
environment available for use via mpi4py
.
Running simple simulations¶
Once the gmxapi
package is installed, running simulations is easy with
gmxapi.read_tpr()
.
import gmxapi as gmx
simulation_input = gmx.read_tpr(tpr_filename)
md = gmx.mdrun(simulation_input)
Note that this sets up the work you want to perform, but does not immediately trigger execution. You can explicitly trigger execution with:
md.run()
or you can let gmxapi automatically launch work in response to the data you request.
The gmxapi.mdrun()
operation produces a simulation trajectory output.
You can use md.output.trajectory
as input to other operations,
or you can get the output directly by calling md.output.trajectory.result()
.
If the simulation has not been run yet when result()
is called,
the simulation will be run before the function returns.
Running ensemble simulations¶
To run a batch of simulations, just pass an array of inputs.:
md = gmx.read_tpr([tpr_filename1, tpr_filename2, ...])
md.run()
Make sure to launch the script in an MPI environment with a sufficient number of ranks to allow one rank per simulation.
For gmxapi 0.1, we recommend configuring the GROMACS build with
GMX_THREAD_MPI=ON
and allowing one rank per node in order to allow each
simulation ensemble member to run on a separate node.
See also
Accessing command line tools¶
In gmxapi 0.1, most GROMACS tools are not yet exposed as gmxapi Python operations.
gmxapi.commandline_operation
provides a way to convert a gmx
(or other) command line tool into an operation that can be used in a gmxapi
script.
In order to establish data dependencies, input and output files need to be
indicated with the input_files
and output_files
parameters.
input_files
and output_files
key word arguments are dictionaries
consisting of files keyed by command line flags.
For example, you might create a gmx solvate operation as:
solvate = gmx.commandline_operation('gmx',
arguments=['solvate', '-box', '5', '5', '5'],
input_files={'-cs': structurefile},
output_files={'-p': topfile,
'-o': structurefile,
}
To check the status or error output of a command line operation, refer to the
returncode
and stderr
outputs.
To access the results from the output file arguments, use the command line flags
as keys in the file
dictionary output.
Example:
structurefile = solvate.output.file['-o'].result()
if solvate.output.returncode.result() != 0:
print(solvate.output.erroroutput.result())
Preparing simulations¶
Continuing the previous example, the output of solvate
may be used as the
input for grompp
:
grompp = gmx.commandline_operation('gmx', 'grompp',
input_files={
'-f': mdpfile,
'-p': solvate.output.file['-p'],
'-c': solvate.output.file['-o'],
'-po': mdout_mdp,
},
output_files={'-o': tprfile})
Then, grompp.output.file['-o']
can be used as the input for gmxapi.read_tpr()
.
Simulation input can be modified with the gmxapi.modify_input()
operation
before being passed to gmxapi.mdrun()
.
For gmxapi 0.1, a subset of MDP parameters may be overridden using the
dictionary passed with the parameters
key word argument.
Example:
simulation_input = gmx.read_tpr(grompp.output.file['-o'])
modified_input = gmx.modify_input(input=simulation_input, parameters={'nsteps': 1000})
md = gmx.mdrun(input=modified_input)
md.run()
Using arbitrary Python functions¶
Generally, a function in the gmxapi package returns an object that references
a node in a work graph,
representing an operation that will be run when the graph executes.
The object has an output
attribute providing access to data Futures that
can be provided as inputs to other operations before computation has actually
been performed.
You can also provide native Python data as input to operations,
or you can operate on native results retrieved from a Future’s result()
method.
However, it is trivial to convert most Python functions into gmxapi compatible
operations with gmxapi.function_wrapper()
.
All function inputs and outputs must have a name and type.
Additionally, functions should be stateless and importable
(e.g. via Python from some.module import myfunction
)
for future compatibility.
Simple functions can just use return()
to publish their output,
as long as they are defined with a return value type annotation.
Functions with multiple outputs can accept an output
key word argument and
assign values to named attributes on the received argument.
Examples:
from gmxapi import function_wrapper
@function_wrapper(output={'data': float})
def add_float(a: float, b: float) -> float:
return a + b
@function_wrapper(output={'data': bool})
def less_than(lhs: float, rhs: float, output=None):
output.data = lhs < rhs
See also
For more on Python type hinting with function annotations, check out PEP 3107.
Subgraphs¶
Basic gmxapi work consists of a flow of data from operation outputs to operation inputs, forming a directed acyclic graph (DAG). In many cases, it can be useful to repeat execution of a subgraph with updated inputs. You may want a data reference that is not tied to the immutable result of a single node in the work graph, but which instead refers to the most recent result of a repeated operation.
One or more operations can be staged in a gmxapi.operation.Subgraph
,
a sort of meta-operation factory that can store input binding behavior so that
instances can be created without providing input arguments.
The subgraph variables serve as input, output, and mutable internal data references which can be updated by operations in the subgraph. Variables also allow state to be propagated between iterations when a subgraph is used in a while loop.
Use gmxapi.subgraph()
to create a new empty subgraph.
The variables
argument declares data handles that define the state of the
subgraph when it is run.
To initialize input to the subgraph, give each variable a name and a value.
To populate a subgraph, enter a SubgraphContext by using a with()
statement.
Operations created in the with block will be captued by the SubgraphContext.
Define the subgraph outputs by assigning operation outputs to subgraph variables
within the with block.
After exiting the with block, the subgraph may be used to create operation instances or may be executed repeatedly in a while loop.
Note
The object returned by gmxapi.subgraph()
is atypical of gmxapi
operations, and has some special behaviors. When used as a Python
context manager,
it enters a “builder” state that changes the behavior of its attribute
variables and of operaton instantiation. After exiting the with()
block, the subgraph variables are no longer assignable, and operation
references obtained within the block are no longer valid.
Looping¶
An operation can be executed an arbitrary number of times with a
gmxapi.while_loop()
by providing a factory function as the
operation argument.
When the loop operation is run, the operation is instantiated and run repeatedly
until condition evaluates True
.
gmxapi.while_loop()
does not provide a direct way to provide operation
arguments. Use a subgraph to define the data flow for iterative operations.
When a condition is a subgraph variable, the variable is evaluated in the running subgraph instance at the beginning of an iteration.
Example:
subgraph = gmx.subgraph(variables={'float_with_default': 1.0, 'bool_data': True})
with subgraph:
# Define the update for float_with_default to come from an add_float operation.
subgraph.float_with_default = add_float(subgraph.float_with_default, 1.).output.data
subgraph.bool_data = less_than(lhs=subgraph.float_with_default, rhs=6.).output.data
operation_instance = subgraph()
operation_instance.run()
assert operation_instance.values['float_with_default'] == 2.
loop = gmx.while_loop(operation=subgraph, condition=subgraph.bool_data)
handle = loop()
assert handle.output.float_with_default.result() == 6
Logging¶
gmxapi uses the Python logging
module to provide hierarchical
logging, organized by submodule.
You can access the logger at gmxapi.logger
or, after importing gmxapi,
through the Python logging framework:
import gmxapi as gmx
import logging
# Get the root gmxapi logger.
gmx_logger = logging.getLogger('gmxapi')
# Set a low default logging level
gmx_logger.setLevel(logging.WARNING)
# Make some tools very verbose
# by descending the hierarchy
gmx_logger.getChild('commandline').setLevel(logging.DEBUG)
# or by direct reference
logging.getLogger('gmxapi.mdrun').setLevel(logging.DEBUG)
You may prefer to adjust the log format or manipulate the log handlers. For example, tag the log output with MPI rank:
try:
from mpi4py import MPI
rank_number = MPI.COMM_WORLD.Get_rank()
except ImportError:
rank_number = 0
rank_tag = ''
MPI = None
else:
rank_tag = 'rank{}:'.format(rank_number)
formatter = logging.Formatter(rank_tag + '%(name)s:%(levelname)s: %(message)s')
# For additional console logging, create and attach a stream handler.
ch = logging.StreamHandler()
ch.setFormatter(formatter)
logging.getLogger().addHandler(ch)
For more information, refer to the Python logging documentation.
More¶
Refer to the gmxapi Python module reference for complete and granular documentation.
For more information on writing or using pluggable simulation extension code, refer to https://gitlab.com/gromacs/gromacs/-/issues/3133. (For gmxapi 0.0.7 and GROMACS 2019, see https://github.com/kassonlab/sample_restraint)